|
Flat Cables  PVC Insulated & Sheathed Copper Conductor 3 core Flat Cables in Voltage Grade up to and including 1100 V & Generally conforming to IS 694 : 1990.
Conductor
The conductor is composed of high purity, bright annealed bare electrolytic grade copper wires complying to IS 8130:1984, which are drawn, annealed and bunched in high precision machines geometrically and appropriately to ensure apposite flexibility, uniform resistance and proper dimension. Insulation
The bunch copper is insulated with a specially formulated PVC compound having high insulation resistance and dielectric strength and conforming to the requirements of Type A of IS 5831:1984 & also suitable to use from -15c to +70c rated conductor temperature. The high speed & fully synchronized extrusion process with automatic on-line controls gives consistence high quality wire insulation. Sheath
Special grade of abrasion resistant PVC compound confirming to the requirements of Type ST 1 of IS 5831:1984 is used as outer sheath and applied over the insulated laid up cores is suitable for outdoor uses & impermeable to water, grease, oil, etc.. Colours
Insulation - Red, Yellow, Blue
Sheath - Black, Blue or as per customer's requirement. Marking The high speed printer ensures continuous print of Brand name, cable size, voltage grade, sequential marking, etc.. through out the cable length. Packing
The Flat Cables are available in wooden drums and in Coil form of different sizes. HP v/s Current
The full load currant for submersible pump motors, 3 phases, 50 cycles.415 ~ 425 V. | HP | 5.0 | 7.5 | 10.0 | 12.5 | 15.5 | 17.5 | 20.0 | 25.0 | 30.0 | 35.0 | 40.0 | 45.0 | 50.0 | | AMP | 7.5 | 11.0 | 14.9 | 18.9 | 22.5 | 25.2 | 28.4 | 35.6 | 42.3 | 50.4 | 58.1 | 62.1 | 67.5 | Derating Factors Multiply the current carrying capacity of the cable by factors give below for various ambient temperatures. | Ambient temperature oC | 30 | 35 | 40 | 45 | 50 | | Rating Factor | 1.09 | 1.04 | 1.00 | 0.95 | 0.77 | Technical Specifications | Conductor | Insulation | Sheath | Sheath | Resistance @ 20oC (Max.) Ohm/km | Current Carrying Capacity @ 40oC Amps. | | Area (Nom.) Sq. mm | No./ Dia. Of Strands Mm | Thickness (Nom.) mm | Thickness (Nom.) mm | Max. Overall Dimensions | | Thickness 'T' Mm | Width 'W' mm | | 1.0 | 14/0.30* | 0.6 | 0.9 | 5.00 | 10.5 | 18.10 | 11 | | 1.5 | 22/0.30* | 0.6 | 0.9 | 5.40 | 11.5 | 12.10 | 14 | | 2.5 | 36/0.30* | 0.7 | 1.0 | 6.40 | 14.0 | 7.41 | 18 | | 4.0 | 56/0.30** | 0.8 | 1.0 | 7.20 | 16.5 | 4.95 | 26 | | 6.0 | 84/0.30** | 0.8 | 1.1 | 8.00 | 18.0 | 3.30 | 31 | - * As per Conductor Class 2 of IS 8130 : 1984
- ** As per Conductor Class 5 of IS 8130 : 1984
Note: The no. of strands are approximate & its diameter is nominal. However the construction of the conductor is designed to satisfy the requirements of the conductor resistance as per IS 8130 : 1984.
|
Phone : 91-2717-250385
Fax : 91-2717-250389
